EJECTOR PUMPS
Mfg.: Germany
Description
Ejector pumps, adjustable with non-return valve, are simple but very effective to drain cellars, shafts and buiding pits and useable to supply transport water in case the water supply is in an unfavourable position. The housing is adjustable in order to bring the inlet and outlet in a good operating position. Two built-in non-return valves avoid backflow of the water. The lowest suction lift is 25 mm, minimum water pressure is 3 bar.
Specification
- Ejector Pumps are simple, but very effective to drain cellars, shafts and buiding pits and useable to supply transport water in case the water supply is in an unfavourable position.
- Can be used to drain water in the oil reservoir tank on the maintenance work of the crude oil storage tank at hazardous area.
- The housing is adjustable in order to bring the inlet and outlet in a good operating position.
- Two built-in non-return valves avoid backflow of the water.
- The lowest suction lift is 25 mm, minimum water pressure is 3 bar.
- Pressure in front of motive water nozzle: 4-10 bar
- Motive water flow QT: 188-295 LPM
- Flood water flow Qp + QT: 425-490 LPM
- Made of aluminium alloy.
- Size inlet: 65 (2.5 inch) with connector storz coupling
- Size outlet: 65 (2.5 inch) with connector storz coupling
- Adapters coupling connection on request.
