Kategori: AWG Accessoiries of fire pumps

AWG Suction Strainers

AWG Suction Strainers
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Description

Available are AWG suction strainers with and without non-return valve and drain arrangement.
We recommend generally suction strainers with non-return valve and drain arrangement in order to prevent discountinuities in the liquid column when the suction process is interrupted and makes it possible to fill the suction pipe run. Pulling the rope of the drain arrangement causes the check valve to open and to drain the suction hose.

Specification

  • AWG Suction strainers with non-return valve and drain arrangement.
  • We recommend generally suction strainer with non-return valve and drain arrangement in order to prevent discountinuities in the liquid column when the suction process is interrupted and makes it possible to fill the suction pipe run.
  • Pulling the rope of the drain arrangement causes the check valve to open and to drain the suction hose.
  • Make a low maintenance fire pump priming system if it is installed at the end of the fire pump suction hose.
  • Body suction strainer made of aluminium alloy and strainer with stainless steel.
  • Connector adapters with storz coupling, aluminium alloy, or on request.
suction strainers
Suction strainer with STORZ connection

Datasheet

wire mesh basket
Wire Mesh Basket for Suction Strainer

suction strainers
Suction strainer with BSRT connection

 

AWG Divider

AWG Divider with Screw Down Valves
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Specification

  • AWG Divider are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction.
  • Each hose line can be shut-off individually by means of a stop valve.
  • The stop valve of the dividers must be according to DIN 14365 easily operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
  • Allows smooth opening and closing and can be used as a regulating element.
  • Body made of aluminium alloy
  • Bonnets made of aluminium alloy, spindle and disc made of brass.
  • Inlet-outlet without caps and chain.
  • Coupling connection on customer request.

AWG DIVIDER with Screw-Down Valves – 2 Outlets

Divider

Divider with screwdown valve

DIVIDER with Screw-Down Valves – 3 Outlets

dividerdivider

 

AWG Water Jet Spray Nozzles

Water Jet/Spray Nozzles with Water Curtain
Manufacturer : AWG Fittings GmbH
Country of origin : Germany

Specification

    • BMM jet/spray branch pipes type.
    • Water jet spray with water curtain to protect fireman when holding the nozzles (branchpipes) against heat and smoke, a water curtain can be added to the full and spray jet.
    • The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°.
    • In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
    • Pipe, nozzle and tip made of aluminium alloy, ball in cold and impact resistant Polyamide.
    • The flow rate at 6 bar is 130-230 l/min depending on the diameter and jet of the nozzle tip. Flow rate with water curtain 290-400 l/min.
    • With spray angle of 15-20°, with water curtain up to 160°.
    • Except as noted otherwise the admissible working pressure is PN16 and adapters are made of aluminium.
    • Throw distance full jet: 27 m.
    • Throw distance spray jet: 13 m.
    • Connector inlet : 2-1/2 inch Storz coupling adapters or on request

Datasheet

water jet spray nozzles

Water Jet/Spray Nozzles
Manufacturer : AWG Fittings GmbH
Country of origin : Germany

Specification

    • BM jet/spray branch pipes type.
    • Pipe, nozzle and tip made of aluminium alloy, ball in cold and impact resistant Polyamide.
    • With spray angle of 15-20°.
    • The flow rate at 6 bar is 400 l/min.
    • Except as noted otherwise the admissible working pressure is PN16 and adapters are made of aluminium.
    • Throw distance full jet: 32 m.
    • Throw distance spray jet: 14 m.
    • Connector inlet : 2-1/2 inch Storz coupling adapters or on request

Datasheet

AWG FireFighting Equipment

The official distributor of AWG brand firefighting equipment for the sales area in Indonesia.

AWG Fittings GmbH


AWG Fittings & Fire Equipment yaitu pabrikan yang memproduksi khusus produk alat peralatan dan perlengkapan pemadam kebakaran yang dirancang dengan desain khusus agar pas ditangan dan aman bagi petugas pemadam kebakaran.

Produk AWG Fittings Fire Equipment

Dapat diklasifikasikan sebagai berikut:

  • Sambungan Coupling selang pemadam tipe Storz System, Instantaneous British Standard BS 336, MultiLug System
  • Adapter Coupling tipe Storz to male/female BSP thread, instantaneous male/female to male/female BSP thread
  • Nozzles Pemadam berupa Turbo nozzles, Pistol nozzles, HS nozzles, Heavy foam nozzles, Jet/spray branchpipes, Jet/spray branchpipes with water curtain, Water shields
  • Perlengkapan Pendukung Pemadam berupa Dividers, Siameses, Suction strainers, Foam Inductors, Medium foam nozzles, Adjustable foam nozzles, CAFS nozzles, Ejector pump, Bilge turbopump, Hose washing attachments, Standpipes
  • Landing Valves

awg fittings

Produk AWG Fitting GmbH

Sesuai dengan semua standar internasional, sebagian produk-produk AWG Fittings & Fire Equipment sebagai berikut:

 

error: Content is protected !!