AWG Equipment for fire fighters Archives - PT. Menara Sukses Gemilang

Hose Washing Attachments

FIRE HOSE WASHING ATTACHMENTS
Mfg.: AWG Fittings GmbH – Germany

Description

The fire hose washing attachments permits thorough, yet protective washing without brushing of fire hoses up to 75 mm inside diameter. Two cone shaped pressure jets are washing the hose twice during each application. The impact of the pressure jets from two annular gaps imparts a forward movement to the hose. The hoses washing attachment requires only normal pipeline pressure.

Spesification

Two cone shaped pressure jets are washing the hose twice during each application.
The impact of the pressure jets from two annular gaps imparts a forward movement to the hose.
The hose washing attachment requires only normal pipeline pressure.
Flow rate: 300 l/min at 6 bar
Made of aluminium alloy
Dimensions (LxWxH): 320 x 250 x 236 mm
Weight: approx. 6 kg
Connector: 2,5 inch Storz coupling or on request

Fire hoses are prone to contamination from various materials including but not limited to smoke, ash, debris, and grease. It is in your best interest to clean your fire hoses regularly. A clean fire hose is a working fire hose. The benefits of a good washer are plentiful. In addition to extending its life, washing and properly maintaining your gear can increase performance and reduce the risk of failure.

AWG Suction Strainers

AWG Suction Strainers
Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Description

Available are AWG suction strainers with and without non-return valve and drain arrangement.
We recommend generally suction strainers with non-return valve and drain arrangement in order to prevent discountinuities in the liquid column when the suction process is interrupted and makes it possible to fill the suction pipe run. Pulling the rope of the drain arrangement causes the check valve to open and to drain the suction hose.

Specification

AWG Suction strainers with non-return valve and drain arrangement.
We recommend generally suction strainer with non-return valve and drain arrangement in order to prevent discountinuities in the liquid column when the suction process is interrupted and makes it possible to fill the suction pipe run.
Pulling the rope of the drain arrangement causes the check valve to open and to drain the suction hose.
Make a low maintenance fire pump priming system if it is installed at the end of the fire pump suction hose.
Body suction strainer made of aluminium alloy and strainer with stainless steel.
Connector adapters with storz coupling, aluminium alloy, or on request.

suction strainers — Suction strainer with non-return valve

LOW LEVEL STRAINERS With Non-Return Clapper

This design allows draw-off almost down to the ground and provides good stability. Oblique outlet permits better guiding of hoses through cellar windows.

SUCTION STRAINERS Without Non-Return Valve and Drain Arrangement

Water Foam Fire Monitor

Water Foam Fire Monitor for mobile use
Brand : AWG
Manufacture : AWG Fittngs GmbH
Country of origin : Germany

Description

Water foam fire monitor type APF 2-HH (HH 1260) – SW 12/S
Up to 1,200 l/min at 8 bar, max. 10 bar
A wide variety of application options make the proven APF 2-HH an all-rounder.
It can be used permanently mounted as a roof monitor or in the portable design for mobile applications.
The continuously adjustable hand lever, as well as the simple push-in connection, which connects the basic unit and the base frame are designed for simple handling.
Both the basic unit and the base frame can be folded up with one hand for saving space.
The APF 2-HH is ready for use with only a short set-up time despite the compact transport position.
Special supporting feet on the base frame provide additional stability in use.

Water Foam Fire Monitor

Specification

Flow rate capacity 1200 l/min at 8 bar.
Outlet with self-priming foam pipe SW 12/S, Self-priming foam branch pipes (SW/S) are a combination of inductor and foam producer.
Admixing rates of max. 6 % can be set via a control device on the inductor.
Maximum pressure 10 bar
Swivelling range Horizontal ± 60° (released ± 360°), Vertical +25° to +90° (released -30° to +90°)
Paint finish Iron shimmer dark grey (similar to RAL 7011).
It can be used permanently mounted as a roof monitor or in the portable design for mobile applications.
Rotary / swivel movement via height adjustable hand lever, as well as the simple push-in connection, which connects the basic unit and the base frame are designed for simple handling.
Both the basic unit and the base frame can be folded up with one hand for saving space.
Inlet Storz coupling size 65 (2,5 inch) aluminium alloy, fixed coupling with ball valve.

Ground Fire Monitor 750 GPM

Ground Fire Monitor 750 GPM
Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Specification

Ground fire monitor capacity 750 GPM, portable type.
The APF 3-P is designed as ground fire monitor 750 gpm for mobile use.
The device equipped with nozzle or foam pipe is suitable for delivering water and any type of foam.
The monitor resilient supporting legs have low-wear carbide stand tips and collapse for transport in just one action.
Vertical adjustment is carried out via a self-locking spindle with hand wheel.
Moreover, a built-in swivel range limit ensures stability at all times of use.
The top and bottom sections of the monitor can be quickly and simply separated from each other without tools.
On the one hand, this provides convenient handling combined with handles integrated in the top and bottom section.
On the other hand, the modular design allows the use of the top section as a roof monitor by mounting it onto a suitable folding joint or roof flange.
Horizontal adjustment with handle and vertical adjustment with hand wheel
Swivelling range Horizontal: ±180°, Vertical: 35° to 90° (released -15° up to +90°)
Flow rate 3000 l/min at 8 bar.
Input collecting breeching with 2x 2.5 inch, adapters coupling connection on request.
Outlet MZS 3000 nozzles complete with pick-up hoses for foam liquids, manual change between full jet and spray jet with integrated self priming for foam agents, a foam mixing rate is possible 1%, 3% and 6%.
Maximum pressure 16 bar
Made of aluminium anodized.
Paint finish, red (RAL 3000).

Ground Fire Monitor 500 GPM

Portable Ground Fire Monitor 500 GPM
Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Specification

Ground fire monitor portable.
The APF 2-TurboFighter, weighing approx. 10 kg, is a lightweight portable ground fire monitors, ideal device for mobile use.
Monitor type Alco Power Fighter APF 2-TurboFighter.
Swivelling range: Horizontal ±40° and Vertical +20° to +60°.
Both the vertical and horizontal swivelling directions can be locked in any position.
Horizontal adjustment with handle.
Vertical adjustment on nozzle.
TurboFighter supplied with an integrated ball valve for shutting off.
The special supporting legs provide stability in use and complete with safety rope.
Materials monitor body made of aluminium alloy, seals NBR and standard parts stainless steel.
Paint finish powder-coated, red (RAL 3000).
Maximum pressure: 16 bar.
Inlet: 2x 2.5 inch, adapters coupling connection on request.
Outlet: 2.5 inch complete with multi-purpose nozzles type MZ or MZV.
The MZ nozzles can set flow rate 500 GPM at 100 Psi (factory set for fixed flow).
The MZV nozzles flow rate is 2000 LPM at 8 bar, adjustable from 600-2000 LPM in steps of 200 each, change of jet shape and change of flow rate possible according to the preset pattern or continuously.
Multi-purpose nozzles (full jet/spray jet, wide spray approx. 100º) are equipped with a baffle which deflects the flow of extinguishing agent at the nozzle outlet so that it comes out through a ring-shaped slit.
Manual change between full and spray jet.
The nozzles made of aluminium alloy.
Compatible with foam concentrate.
Colour black anodized.
Throw distance (full jet position) with angle of approx. 25º to 30º at 8 bar operating pressure is approx. 50 meter.

ground fire monitor — Ground Fire Monitor Portable

AWG Divider

AWG Divider with Screw Down Valves
Brand: AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

S p e c i f i c a t i o n

AWG Divider are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction.
Each hose line can be shut-off individually by means of a stop valve.
The stop valve of the dividers must be according to DIN 14365 easily operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.
Allows smooth opening and closing and can be used as a regulating element.
Body made of aluminium alloy
Bonnets made of aluminium alloy, spindle and disc made of brass.
Inlet-outlet without caps and chain.
Coupling connection on customer request.

AWG DIVIDER with Screw-Down Valves – 2 Outlets

DIVIDER with Screw-Down Valves – 3 Outlets

divider divider

AWG Dividers with Ball Valves
Brand: AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

S p e c i f i c a t i o n

They have a straight free-flow waterway, very low friction loss and easy and quick controllability.
This dividers is a fire mobile equipment and cannot be used direct on the pressure outlet of a pump, must be used a hoses have a length of minimum 15 meter in front of the dividers.
Body dividers made of aluminium alloy and ball made of polyamide.
Inlet and outlet without caps and chain
Adapters coupling connection on customer request.

AWG DIVIDER with Ball Valves – 2 Outlets

DIVIDERS with Ball Valves – 3 Outlets

divider

AWG Foam Inductors

FOAM INDUCTORS DIN 14384
Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Specification

Inductors “L” type foam inductor without handle, made of body Polyoxymethylen (POM) are extremely lightweight and do not need a handle.
The foam inductor are designed to feed foam concentrates at a set mixing rate into the hose line.
Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium and also for heavy foam nozzles.
The injector system creates a vacuum in the body of the inductor and the foam concentrate is picked up via a suction hose ND 19 with a Storz 25-D coupling. At the foam inlet Storz 25-D adapters are generally mounted.
A mixing rate between 0% and 6% is possible.
Inlet / outlet connector with 65 (2,5 inch) storz coupling aluminium alloy or on request.
Nominal type : Z2, Z4, and Z8.
Flow rate at 8 bar : 200 LPM (for Z2), 400 LPM (for Z4), and 800 LPM (for Z8).
When supply equipped with Pick-Up Hoses EN 16712-2, inlet: storz 25-D, outlet 25-D, Ø inside 19 mm, Ø/L 55 mm x 1500 mm.
The connection type for inlet and outlet, Storz coupling, Instantaneous coupling or on customer’s request.

FOAM INDUCTORS “FD” WITH PRECISION DOSAGE, EN 16712-1

Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

Specification

The foam inductors are designed to feed foam concentrates at a set mixing rate into the hose line.
Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium and also for heavy foam nozzles.
The injector system creates a vacuum in the body of the inductor and the foam concentrate is picked up via a suction hose ND 20 with a Storz 25-D coupling.
A mixing rate between 0% and 6% is possible.
The admixing unit of these new and light-weight foam inductors “FD” are made of black anodizes aluminium.
The powder coated aluminium base ensures the inductors’ stability in action.
The rotatable admixing unit guarantees kink-free pick-up hoses.
By turning the rate setting sleeve, the admixing rate can be set.
Available rates are: 0 – 0,1 – 0,2 – 0,5 – 1 – 2 – 3 – 4 – 5 – 6 %.
Working pressure is PN16 (16 bar)
Inlet / outlet connector with 65 (2,5 inch) storz coupling aluminium alloy or on request.
Nominal type : Z2 and Z4.
Flow rate : Size Z2 with flow rate at 8 bar is 200 l/min and Size Z4 with flow rate at 8 bar is 400 l/min.
When supply equipped with Pick-Up Hoses EN 16712-2, inlet: storz 25-D, outlet 25-D, Ø inside 19 mm, Ø/L 55 mm x 1500 mm.

AWG Foam Inductor “FD” WITH PRECISION DOSAGE, EN 16712-1

AWG Foam Nozzles

FOAM NOZZLES
Brand : AWG
Manufacture : AWG Fittings GmbH
Country of origin : Germany

The foam inductors are designed to feed foam concentrates at a set mixing rate into the hose line. Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium- and also for heavy foam nozzles. The injector system creates a vacuum in the body of the inductor and the foam concentrate is picked up via a suction hose ND 19 with a Storz 25-D coupling. At the foam inlet Storz 25-D adapters are generally mounted. A mixing rate between 0% and 6% is possible.

Specification

AWG Foam Nozzle is the air aspirating design makes the heavy foam nozzles suitable for use with all low expansion foam concentrates; protein, fluoroprotein, AFFF, and AR-AFFF.
The nozzle shall be constructed of light weight materials with pipe nozzle in stainless steel, protection ring and handle in rubber and ball valve shut-off in aluminium alloy.
Recommended working pressure at the inlet is 3-5 bar.
Nominal size: S2, S4, and S8 to be operated with AWG foam inductor Z2, Z4, and Z8.
Flow rate: 200 LPM (S2), 400 LPM (S4), and 800 LPM (S8) with pressure at the inlet is 5 bar.
Throw distance: approx. 23 m (S2), 26 m (S4), and 36 m (S8).
Size inlet: 2-1/2 inch
The connection type instantaneous coupling, Storz coupling or on customer’s request.
Can operates with fresh or sea water.

foam nozzles — Low-expansion foam nozzle

AWG Water Shields Nozzles

Water Shields Nozzles
Mfg.: AWG Fittings GmbH – Germany

A water shield/ water wall is a spray of water that acts as a barrier the fire protection and shielding to shield personnel and equipment against radiant heat, harmful gases, and flames.
To build up large water veils or a water wall, to protect against gases, smoke, to cool objects. In use the unit is firmly pressed to the ground by water pressure and is therefore working without manpower. Several units can be linked up for wide water screen.

Specification

To build up large water veils or a water wall, to protect against gases, smoke, to cool objects.
In use the unit is firmly pressed to the ground by water pressure and is therefore working without manpower.
Several units can be linked up for wide water screen.
Made of aluminium alloy.
Size inlet 2.5″
Storz adapter coupling connection or on request

Water Shield Nozzles

Water Shields flow rate choice:

Flow rate at 8 bar: 500 LPM, Throw width 24 meter, Throw height 7 meter
Flow rate at 8 bar: 800 LPM, Throw width 27 meter, Throw height 9 meter
Flow rate at 8 bar: 1400 LPM, Throw width 31 meter, Throw height 10 meter

Taking too long?

Reload document

Open in new tab

Download [87.53 KB]

AWG Water Jet Spray Nozzles

Water Jet Spray Nozzles with Water Curtain
Brand : AWG
Manufacturer : AWG Fittings GmbH
Country of origin : Germany

Specification

Water jet spray with water curtain to protect fireman when holding the nozzles (branchpipes) against heat and smoke, a water curtain can be added to the full and spray jet.
The water curtain element is arranged annularly behind the nozzle. By means of an adjusting ring which can be turned easily, also under pressure, the outlet angle can be varied between 0° and 160°.
In moments of danger the entire water flow can be shut-off with a single motion, irrespective of whether the full jet or spray jet had been selected and independently of setting of the water curtain.
Pipe, nozzle and tip made of aluminium alloy, ball in cold and impact resistant Polyamide.
The flow rate at 6 bar is 130-230 l/min depending on the diameter and jet of the nozzle tip. Flow rate with water curtain 290-400 l/min.
With spray angle of 15-20°, with water curtain up to 160°.
Except as noted otherwise the admissible working pressure is PN16 and adapters are made of aluminium.
Throw distance full jet: 27 m.
Throw distance spray jet: 13 m.
Connector inlet : 2-1/2 inch Storz coupling adapters
Ø nozzle size : 22 mm
Ø tip size : 16 mm
Weight : approx. 2.6 kg

Water Jet Spray Nozzles without Water Curtain
Brand : AWG
Manufacturer : AWG Fittings GmbH
Country of origin : Germany

Specification

Pipe, nozzle and tip made of aluminium alloy, ball in cold and impact resistant Polyamide.
With spray angle of 15-20°.
The flow rate at 6 bar is 400 l/min.
Except as noted otherwise the admissible working pressure is PN16 and adapters are made of aluminium.
Throw distance full jet: 32 m.
Throw distance spray jet: 14 m.
Connector inlet : 2-1/2 inch Storz coupling adapters
Ø nozzle size : 22 mm
Ø tip size : 16 mm
Weight : approx. 2.1 kg