STHAMEX AFFF 3% F-15 #4341
Mfg.: Dr. Sthamer – Hamburg
Description
STHAMEX AFFF 3% F-15 #4341 is a synthetic, aqueous film forming fire extinguishing foam concentrate, based on surface active agents.
Special surfactants, fluorinated components and freeze protection characterise the composition of this outstanding product.
Approval
♦ DIN EN 1568 Certificate No.: KB-290/14, Part 3 (Heptane): IB/IB, Part 1: Medium ex.—
♦ ICAO Airport Services Manual, Low expansion foam — Level B
♦ IMO MSC.1/Circ. 1312 non-polar (Heptane)
Properties
STHAMEX AFFF 3% F-15 #4341 forms foam very readily and is used for both low and medium expansion foam applications.
The film forming and re-ignition preventing ingredients of STHAMEX®-AFFF 3% F-15 #4341 provide for extremely fast and effective extinction especial-ly when used on class B fires.
The aqueous film formed out of the draining foam solution spreads extremely fast and enhances the flowing properties and burn-back resistance of the foam.
The extinction time is reduced considerably and the fire source cooled.
The aqueous film even extinguishes areas scarcely covered with foam and prevents re-igniting of areas, where the foam layer is ruptured.
The foam is stable and in combination with the aqueous film, it forms a lasting, gastight layer on flammable areas. Due to its high foam density a long throwing range can be achieved.
The foam is oleophobic, i.e. it does not pick up fuel and is therefore particularly suitable for “sub-surface” foam application.
On hydrocarbon products STHAMEX® AFFF 3% F-15 #4341 can be applied as non-aspirated, aqueous solution by means of e.g. water monitors, water sprinklers, deluge systems etc.
STHAMEX® AFFF 3% F-15 #4341 is not suitable for use on polar solvents, e.g. alcohols.
STHAMEX® AFFF 3% F-15 #4341 does not contain silicones.
Application:
- Used at 3% concentration and applied with all standard low and medium expansion foam equipment and fixed foam installations especially for class B fires.
- Can be applied using water monitors, water sprinklers or deluge systems.
- Seawater, brackish water and treated industrial water do not affect the out-standing fire performance.
- Used in petrochemical industries, on airports and in on-and offshore areas.
Sthamex AFFF 3% F-15 #4341
Physical properties and technical data:
- Recommended induction rate: 3% low expansion foam/ medium expansion foam, non-polar liquids
- Foam expansion* (according to EN 1568): 5 – 10, low expansion foam* and 60 – 120, medium expansion foam*
- 25%/50% water drainage time* (according to EN 1568): 2-4 minutes / 4-8 minutes low expansion foam* and 1-3 minutes / 3-5 minutes medium expansion foam*
- Colour: colorless to yellow
- Viscosity: at 20°C < 10 mm²/sec and at 0°C < 20 mm²/sec and at -15°C < 50 mm²/sec
- pH value at 20°C: 6,5 – 8,5
- Frost resistance -15°C
- Note: * Foam expansion and drainage times may vary, depending on foam equipment and operating pressure
Shelf Life
>10 years, if stored according to our recommendations (see technical info leaflet TM014 ‘Storage of Synthetic Fire Extinguishing Foam Concentrates’).
Packaging
Available in jerrycans, plastic drums, iron drums, pallet containers (totes) and in bulk.
1 pail @ 25 liters
