STHAMEX-AFFF 6%

STHAMEX AFFF 6% F-5 #4603
Mfg.: Dr.Sthamer – Hamburg

STHAMEX®-AFFF 6% F-5 (#4603)
STHAMEX AFFF 6% F-5 is a synthetic, aqueous film-forming fire-extinguishing foam concentrate based on surface-active agents.

Applications:
Used at 6% concentration and applied with all standard low expansion foam equipment and fixed foam installations especially for class B fires.
The non-aspirated solution of STHAMEX®-AFFF 6% F-5 can be applied using water monitors, water sprinklers or deluge systems.
STHAMEX®-AFFF 6% F-5 is used in petrochemical industries, on airports and in on- and offshore areas.
Seawater, brackish water and treated industrial water do not affect the outstanding fire performance.

Limitations:
STHAMEX®-AFFF 6% F-5 is not suitable for use on polar solvents, such as alcohols.

Physical properties and technical data:
Recommended induction rate: 6% low expansion foam, non-polar liquids
Foam expansion* (according to EN 1568): 5 – 10 low expansion foam*
25% water drainage time (according to EN 1568): 2 – 4 minutes
50% water drainage time (according to EN 1568): 4 – 8 minutes
Colour: yellow to brown
pH value at 20°C : 6,5 – 8,5
Density at 20°C : 1,010 ± 0,02 g/ml
Sediments: none
Surface tension: < 17,0 mN/m
Spreading coefficient: > 3 mN/m (Cyclohexane)
Frost resistance: -5°C (prevent from freezing)
Viscosity at 20°C : < 5 mm²/sec
Viscosity at  0°C : < 10 mm²/sec
Viscosity at -5°C : < 30 mm²/sec

Shelf Life:
STHAMEX®-AFFF 6% F-5 has a shelf life of >10 years, if stored according to our recommendations (see technical info leaflet TM014 ‘Storage of Synthe-tic Fire Extinguishing Foam Concentrates’).

Packaging:
STHAMEX®-AFFF 6% F-5 is available in jerrycans, plastic drums, pallet containers (totes).

Approval:
STHAMEX®-AFFF 6% F-5 is a type approved fire extinguishing agent for class B fires according to the following standards:
Certificate No.: KB-302/14 Part 3 (Heptane): IA/IA
ICAO Airport Services Manual Low expansion foam — Level B

sthamex afff 3%

 

Sthamex AFFF 3% F-15 #4341

STHAMEX-AFFF 3% F-15 (#4341)
Mfg.: Dr.Sthamer – Hamburg

STHAMEX®-AFFF 3% F-15 (#4341)
STHAMEX®-AFFF 3% F-15 is a synthetic, aqueous film forming fire extinguishing foam concentrate, based on surface active agents. It is designed for use at a 3% concentration and applied with all standard low, medium, and high expansion foam equipment and fixed foam installations especially for class B fires.

Key Features:
– Oleophobic Properties: The foam is resistant to fuel contamination, making it particularly suitable for sub-surface foam applications.
– Application Versatility: On hydrocarbon-based products, it can be applied as a non-aspirated aqueous solution using equipment such as water monitors, water sprinklers, and deluge systems.

Applications:
Petrochemical industries
Airports
Onshore and offshore facilities

Limitations:
STHAMEX®-AFFF 3% F-15 (#4341) is not suitable for use on polar solvents, such as alcohols.

Physical properties and technical data:
Recommended induction rate : 3% low, medium and high expansion foam, non-polar liquids
Foam expansion (according to EN 1568) : 7 – 11 low expansion foam, 40 – 80 medium expansion foam, 800 – 1100 high expansion foam
25% water drainage time (according to EN 1568): 1 – 5 minutes low expansion foam, 1 – 4 minutes medium expansion foam, 2 – 5 minutes minutes high expansion foam
50% water drainage time (according to EN 1568): 3 – 7 minutes low expansion foam, 3 – 5 minutes medium expansion foam, 4 – 6 minutes high expansion foam
Colour colorless to yellow
pH value at 20°C : 6,5 – 8,5
Density at 20°C : 1,040 ± 0,02 g/ml
Sediments: none
Surface tension: < 17,0 mN/m
Spreading coefficient: > 3 mN/m (Cyclohexane)
Frost resistance: -15°C
Viscosity at 20°C : < 10 mm²/sec

 

STHAMEX-AFFF 3%

STHAMEX AFFF 3% F-0 #4302
Mfg.: Dr.Sthamer – Hamburg

STHAMEX®-AFFF 3% F-0 (#4302)
STHAMEX AFFF 3% F-0 is a synthetic, aqueous film-forming fire-extinguishing foam concentrate based on surface-active agents. It is designed for use at a 3% concentration and is compatible with all standard low-expansion foam equipment and fixed foam installations, particularly for combating Class B fires.

Applications:
Petrochemical industries
Airports
Onshore and offshore facilities

Limitations:
STHAMEX®-AFFF 3% F-0 is not suitable for use on polar solvents, such as alcohols.

Physical properties and technical data:
Recommended induction rate: 3% low expansion foam, non-polar liquids
Foam expansion* (according to EN 1568): 5 – 10 low expansion foam*
25% water drainage time (according to EN 1568): 4 – 8 minutes
50% water drainage time (according to EN 1568): 3 – 7 minutes
Colour: yellow to brown
pH value at 20°C : 6,5 – 8,5
Density at 20°C : 1,020 ± 0,02 g/ml
Sediments: none
Surface tension: < 17,5 mN/m
Spreading coefficient: > 3 mN/m (Cyclohexane)
Frost resistance: 0°C (prevent from freezing)
Viscosity at 20°C : < 10 mm²/sec
Viscosity at  0°C : < 20 mm²/sec

sthamex afff 3%

 

Sthamex Foam Concentrate

Sthamex foam concentrate adalah cairan yang bila dicampur dengan air dalam konsentrasi yang tepat membentuk larutan busa untuk pemadaman kebakaran api kelas B (hidrokarbon non-polar, polar solvent), memadamkan kebakaran api pada cairan yang mudah menyala atau mudah terbakar seperti bensin, minyak tanah, solar, alkohol, keton, ester, dll.

Bagaimana busa dihasilkan
Sistem proporsional mencampur persentase tetap konsentrasi busa dengan air.
Campuran larutan busa yang dihasilkan diperluas dengan udara dalam generator busa.
Proporsi lebih rendah menghasilkan busa basah, berat dan dapat mengalir, sementara busa kaku dengan sifat perekat dan insulasi yang baik dicapai dengan proporsi yang lebih tinggi.
Dalam kasus apa pun, volume busa yang dihasilkan berkali-kali lipat dari volume larutan busa.

Bagaimana busa memadamkan api
Pembakaran memiliki empat prasyarat dasar: bahan yang mudah terbakar, suplai oksigen, proporsi bahan yang mudah terbakar yang benar untuk oksigen, dan suhu pengapian yang relevan.
Jika salah satu prasyarat ini hilang, api tidak bisa menyala.
Dari sudut pandang kimia, pembakaran adalah proses di mana suatu zat bereaksi cepat dengan oksigen dan melepaskan panas, yang disebabkan oleh suhu pengapian.
Untuk memadamkan api, material yang terbakar harus dipisahkan dari suplai oksigen, atau didinginkan di bawah suhu pengapian. Persis hal ini dicapai dengan busa pemadam kebakaran.

Efek pemadaman berikut ini digunakan saat mengaplikasikan busa:

Efek pemisahan
Selimut busa menutupi bagian depan api, memisahkannya dari udara ambien dan mencegah suplai oksigen lebih lanjut ke bahan yang mudah terbakar.

Efek pendinginan
Air yang mengering dari busa menguap di bagian depan api, di mana panas hilang dan laju reaksi antara bahan mudah terbakar dan oksigen atmosfer berkurang secara signifikan. Bahan yang mudah terbakar didinginkan oleh air yang mengalir dari larutan busa.

Efek Menutupi
Selimut busa menutupi bagian depan api, mencegah emisi gas lebih lanjut dari bahan yang terbakar, misalnya gas yang mudah terbakar dari materi pembakar tidak bisa lagi mencapai bagian depan api. Pendinginan bahan pembakaran secara simultan mengurangi tekanan uap, menghindari kebocoran gas dan karena itu membakar kembali. Cairan-cairan vulkanous yang tumpah dapat ditutupi secara preventatif, untuk mengurangi emisi yang berbahaya bagi lingkungan. Ini juga secara signifikan mengurangi risiko kebakaran.

Efek penekanan
Dengan busa ekspansi tinggi atau menengah, menekan dan memisahkan oksigen atmosfer dari dan gas yang mudah terbakar yang diperlukan untuk proses pembakaran.

Efek isolasi
Konduktivitas termal rendah dari insulasi busa yang belum menyala, atau padam, bahan mudah terbakar dari radiasi termal dan sumber penyulut.

Fields of Application Dr.STHAMER foam concentrate:

Petroleum and Petrochemical industry, Chemical industry, Plastics industry
 Airport fire services, commercial airports, in hangars or on helidecks
 Maritime vessels, tugboats and firefighting vessels
 Mining industry
 Wildfires
 Municipal fire services

sthamex foam concentrate


sthamex foam concentrate
Sthamex Foam Concentrate

 

error: Content is protected !!